Why I Use Briggs & Stratton Fuel Fit Every So Often to Keep My Mower Starting First Time
The Verdict: Why a Lawn Mower Fuel Stabiliser is a Sound Investment
Using a lawn mower fuel stabiliser has become a key part of my maintenance routine for one simple reason: reliability. This guide explains why I use Briggs & Stratton Fuel Fit throughout the growing season, and not just in winter when my tools are stored away, to ensure my kit starts on the first or second pull, every single time.
If you have ever spent a Saturday morning fruitlessly yanking a starter cord until your shoulder ached, you know that stale fuel is the enemy of a productive day. I don’t believe you need to use it in every single tank during the peak of summer, but using it periodically acts as a “system flush.” It’s a preventative measure to keep the carburettor clean and ensure that the fuel sitting in the lines doesn’t turn into a gummy mess between cuts.
A Note on Reliability: I run a garden maintenance business and rely on petrol equipment daily. Tools that fail to start cost me time and money. I only use products that keep my engines running clean and starting first time. If a product doesn’t perform in real-world conditions, I don’t recommend it.

At a Glance: Briggs & Stratton Lawn Mower Fuel Stabiliser (And Small Engine) Specs
| Feature | Specification | Why it matters |
|---|---|---|
| Volume | 250ml | Compact bottle that treats up to 50 litres of petrol. |
| Treatment Ratio | 10ml per 5 litres | Very concentrated: a little goes a long way. |
| Dual Action | Stabiliser & Cleaner | Keeps fuel fresh for 3 years and cleans the carburettor while running. |
| Manufacturer | Briggs & Stratton | Designed by the world’s largest manufacturer of small petrol engines. |
| Compatibility | 2-stroke and 4-stroke | Works in mowers, strimmers and chainsaws. |
Real-World Performance: The Periodic “System Flush”
In the UK, the petrol we get at the pumps (E10) contains up to 10% ethanol. Ethanol is a magnet for moisture. If your mower sits in a damp shed for even a fortnight between cuts, that fuel begins to degrade, creating a gummy residue that clogs up the tiny jets in your carburettor. This is exactly why many mowers refuse to start after sitting for a few weeks.
I now add this to my 5-litre petrol can every third or fourth refill. When you use it this way, it acts as a “detox” for the engine. For the cost of a couple of coffees, you can treat yourself to enough fuel to last a year or more. A carburettor clean or replacement can easily cost £60–£120, so this is cheap insurance. It’s about knowing that when you pull the cord, the machine responds immediately.
A single 250ml bottle treats 50 litres of fuel. Because I use it periodically rather than every time, one bottle will easily last multiple seasons. Compared to generic supermarket stabilisers, Fuel Fit feels more concentrated and purpose-built for hot-running air-cooled engines.

The Good, The Bad, and the Truth About This Lawn Mower Fuel Stabiliser
The Good
- Incredible value, one bottle lasts a long time.
- Easy dosing with built-in measuring chamber.
- Detergents help keep the engine clean internally.
- Works in both 2-stroke and 4-stroke tools.
- No need for a measuring cylinder, this bottle makes it just as simple.
The Bad
- Strong chemical smell, mix outdoors.
- The foil seal can be fiddly to remove.
- Benefits are preventative, not instant.
Who Is This For?
Buy this if:
- Your mower sometimes feels slightly rough, hesitant, or inconsistent during use
- You want to help keep the fuel system clean and running smoothly over time
- You use E10 petrol from the pump
- Your mower sits idle for weeks between cuts.
- You want to avoid the springtime starting struggle.
Avoid this if:
- You only use alkylate fuels such as Aspen.
- You use battery garden tools.
Maintenance Tip: The Mid-Season Clean
Most people only think about fuel stabiliser before winter. Using Briggs & Stratton Fuel Fit every few tanks during the season helps break down carbon deposits before they harden. It’s a proactive way to keep the internals clean without dismantling the engine.
Quick FAQ
How often should you use Fuel Fit?
I recommend using it every 3–4 tanks during the season to keep the system clean. Crucially, you should also use it in your final tank of the year before winter storage to ensure the mower starts without drama next spring.
Can you use it in E10 petrol?
Yes, it is specifically designed to combat the moisture-attracting properties of E10 petrol, which is the main cause of gummy deposits in the carburettor.
Does it replace servicing?
No. This is preventative maintenance designed to keep the fuel system healthy. It doesn’t replace the need for fresh oil, a clean air filter, or a sharpened blade.
Final Verdict
The Briggs & Stratton Fuel Fit is an essential bit of kit for petrol garden tools. Cheap, easy to dose, and made by the company that builds the engines themselves.
Check the latest deals on Briggs & Stratton Fuel Fit Additive/Stabiliser here:
As an Amazon Associate, I may earn a small commission from qualifying purchases at no extra cost to you.
